292 D. Tuazon St. 1115 QC, Philippines
(+63-2) 364-3505 to 09
inquiry@boysen.com.ph

PRODUCTS

Boysen® Roofgard™

Boysen® Roofgard™ is a gloss acrylic, water-based roof paint designed to protect and adhere to most roof substrates. It gives a durable and flexible film, fast-drying time and good gloss retention.

Principal uses: For galvanized iron surfaces, pre-painted galvanized sheets, asphalt shingles, and unglazed roof tiles.

PRACTICAL COVERAGE:
25-30 square meters / 4-liters per coat

APPLICATION:
Brush, roller or spray

Clean equipment with soap and water after use.

SURFACE DRY: 
Thirty (30) minutes

DRY THROUGH: 
Two (2) hours

DRY FILM THICKNESS: 
1.5 mils/coat

OVERCOATING INTERVAL: 
Two (2) hours

THINNING:
Maximum ½ liter water per 4-liter paint

PACKAGING:
4-liter and 16-liter cans

COLORANTS:  Use Boysen® Latex Colors for tinting to achieve pastel shades. To obtain darker colors, intermix standard colors or request for a factory mix color.

SURFACE PREPARATION:

Metal roofs
For unpainted galvanized iron sheets, etch the surface by applying 10% Boysen® Metal Etching Solution #71 - dilute one (1) part of B71 to nine (9) parts water. Wipe the surface with rag soaked in Boysen® Paint Thinner #0340 to remove grease. Rinse with water and let dry.

For pre-painted galvanized iron sheets, scuff sand surface using sandpaper and wipe the surface with clean rag before applying paint. Spot prime if necessary.

For corroded G.I. surface, remove rust by wire brushing and use Boysen® Metal Etching Solution #71. Let it stay for ten (10) to fifteen (15) minutes. Be sure to wash off surface thoroughly with water or paint thinner and let dry. Apply primer a few hours after application of B71 and before rust sets in.


Roof tiles
Allow fresh concrete plaster to cure at least fourteen (14) to twenty-eight (28) days. Make sure that the surface is clean, dry, and that good weather persists prior to painting. 

If repainting, remove loose paint to sound surface. Putty minor surface imperfections with Boysen®Acrytex™ Cast #1711. Spot prime puttied portions. Scuff sand intact film for anchorage of succeeding coats. Treat mildew growth with fungicidal wash solution (1:3, laundry bleach to water, respectively). Let stand overnight and rinse off residue with water. Let dry. Make sure that the surface is clean, dry, and that good weather persists prior to painting. 


Asphalt shingles
Make sure that the surface is clean, dry, and that good weather persists prior to painting.

For previously painted surfaces, scuff sand intact film and wipe the surface with clean rag before applying paint. Spot prime if necessary. Make sure that the surface is clean, dry, and that good weather persists prior to painting.

 

PAINTING SCHEDULE:

Metal roofs
1st coat:
For new painting: Boysen® Red Oxide Primer #310, Boysen® Rust Off™ Primer Gray #330 (over bare, rust-treated, or chalky surfaces), Boysen® Primeguard™ #4310 or Boysen® Epoxy Metal Primer

For repainting: Boysen® Red Oxide Primer #310 or Boysen® Rust Off™ Primer Gray #330 (over bare, rust-treated, or chalky surfaces)

Topcoat:
Boysen® Roofgard™ 
Two (2) to three (3) coats; any desired color.

For pre-painted G.I. sheets with paint in good condition, clean surface of dirt and dust by washing and apply two (2) coats of Boysen® Roofgard™.


Roof tiles
Primer: 
Boysen®Acrytex™ Primer #1705 

Spot Putty: 
Boysen®Acrytex™ Cast #1711

Topcoat: 
Boysen® Roofgard™
Two (2) to three (3) coats; any desired color.


Asphalt shingles
Boysen® Roofgard™
Two (2) to three (3) coats; any desired color.

COLORS:

Laguna White 
B2501

Samar Beige 
B2520

Pacific Blue 
B2540

Baguio Green 
B2550

Orient Gold 
B2560

Spanish Red 
B2570

Terra Cotta 
B2573

For technical reasons connected with color reproduction and paint manufacturing, these patterns may not exactly match the paint color.

B2501 Boysen Roofgard Laguna White
 
B2520 Boysen Roofgard Samar Beige
 
B2540 Boysen Roofgard Pacific Blue
 
B2550 Boysen Roofgard Baguio Green
 
B2560 Boysen Roofgard Orient Gold
 
  • COLOREXPRESS