292 D. Tuazon St. 1115 QC, Philippines
(+63-2) 364-3505 to 09
inquiry@boysen.com.ph

PRODUCTS

Boysen® Permacoat™ Latex

Boysen® Permacoat™ Latex Paint is a 100% acrylic latex paint with excellent hiding, durability and dirt pick-up resistance. It finishes painting jobs in less coats, yet lasts longer than other brands allowing you to save a lot on time, effort, worry and money. 

Principal uses: For interior and exterior such as concrete, stucco, bricks plaster, hollow blocks, drywall surfaces, and properly primed wood.

PRACTICAL COVERAGE:
Plain finish
25-30 square meters / 4-liters per coat

Textured finish
15-18 square meters / 4-liters per coat

APPLICATION:
Brush, roller or airless spray

SURFACE DRY: 
Thirty (30) minutes

DRY THROUGH: 
Two (2) hours

DRY FILM THICKNESS: 
1-1.5 mils/coat

OVERCOATING INTERVAL: 
Allowance one (1) hour before recoating

THINNING: 
Use as supplied. If necessary, thin with not more than ½ liter of water per 4-liter can.

PACKAGING:
16-liter, 4-liter and 1-liter cans (white only)

COLORANTS: Use only Boysen® Latex Colors for tinting to achieve pastel shades. To produce dark shades, use factory or Mix and Match™ pre-mixed colors. Do not use Hansa Yellow B1466 and Toluidine Red B1407 for exterior applications.

SURFACE PREPARATION:

Concrete
Allow new masonry to dry for fourteen (14) to twenty-eight (28) days under normal weather conditions. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar.Treat new masonry with a solution of one (1) part Boysen® Masonry Neutralizer #44 diluted in sixteen (16) parts water, applying liberally by brush or roller. Not needed if Boysen® Acrytex™ Primer #1705 is to be used as your first coat. Let it stand overnight before rinsing with water or rough sanding to remove white crystals that form on the surface. Let dry before painting.

If repainting, remove all loose, scaling, flaking, and peeling off paint by wire brushing, scraping, or rough sanding. When necessary, use Boysen® Paint and Varnish Remover #141 but make sure that residue is completely washed off from the surface to prevent adverse reactions with succeeding coats. Let it dry. Sand smooth painted surfaces for improved inter-coat adhesion.

For chalking old latex paint, apply one (1) coat of Boysen® Chalk Blocker #7304. Let dry overnight. In case of mildew infestation, treat affected areas with a fungicidal wash solution or household bleach mixed with water (1:3, respectively). Let the treatment stay overnight before wiping off residue with damp cloth. Let dry.


Dry Wall
Affix drywall boards following specific standard installation guidelines by the board manufacturer. Check for paint compatibility and drying time of joint compound.

If repainting, remove all loose, scaling, flaking, and peeling off paint by wire brushing, scraping, or rough sanding. When necessary, use Boysen® Paint and Varnish Remover #141 but make sure that residue is completely washed off from the surface to prevent adverse reactions with succeeding coats. Let it dry. Sand smooth painted surfaces for improved inter-coat adhesion.

For chalking old latex paint, apply one (1) coat of Boysen® Chalk Blocker #7304. 

Let dry overnight. In case of mildew infestation, treat affected areas with a fungicidal wash solution or household bleach mixed with water (1:3, respectively). Let the treatment stay overnight before wiping off residue with damp cloth. Let dry.

 

PAINT APPLICATION:

Concrete
1st Coat:
Boysen® Permacoat™ Latex Flat #701 (100% acrylic, waterbased)  or
Boysen® Acrytex™ Primer #1705 (solvent-based acrylic, water-tight)
Let dry for one (1) hour.

Putty:
Boysen® Masonry Putty #7311 (for interior) or
Boysen® Acrytex™ Cast #1711 (for exterior)
Let dry for one (1) hour. Spot prime puttied portions.

Texture:
Spray Boysen® Acrytex™ Cast #1711 by mortar gun for texture.
Let dry for one (1) hour. Spot prime puttied and textured portions.

2nd & 3rd Coat:
Boysen® Permacoat™ Latex*
Let dry for one (1) hour in between coats.


Drywall
1st Coat:
Boysen® Permacoat™ Latex Flat #701 (100% acrylic, waterbased)
Let dry for one (1) hour.

Putty:
Putty minor surface imperfections with Boysen® Gypsum Joint Compound
Let dry for one (1) hour. Spot prime puttied portions.

Texture:
Spray Boysen® Acrytex™ Cast #1711 by mortar gun for texture.
Let dry for one (1) hour. Spot prime puttied and textured portions.

2nd & 3rd Coat:
Boysen® Permacoat™ Latex*
Let dry for one (1) hour in between coats.


*Selections for topcoat:
·Flat Latex #701
·Semi-Gloss Latex #715
·Gloss Latex #710

COLORS:

White 
B701

Off White 
B702

Cream 
B721

Pawn Beige 
B722

Moonlight 
B723

Bone Ivory 
B725

Ashton Gray 
B731

Mystery Winter 
B752

Yellow Ware 
B761

Tile Red 
B771

Ojay 
B772

Old Redwood 
B774

Chocolate Brown 
B780

Chocolate Kiss 
B781

Tulle White 
B7501

Winter Morning 
B7502

Stone Beige 
B7520

Pure Ivory 
B7521

Basic Beige 
B7522

For technical reasons connected with color reproduction and paint manufacturing, these patterns may not exactly match the paint color.

B701 Permacoat Flat Latex Paint
 
B702 Boysen Permacoat Latex Off White
 
B721 Boysen Permacoat Latex Cream 
 
B723 Boysen Permacoat Flat Latex Moonlight
 
B725 Boysen Permacoat Flat Latex Bone Ivory 
 
B771 Boysen Permacoat Tile Red
 
B791 Boysen Permacoat Flat Latex Black
 
B710 Premium Gloss Latex Paint
 
B714 Boysen Permacoat Latex Satin Finish
 
B715 Permacoat Semigloss Latex Paint
 
B715N1153 Boysen Permacoat Semigloss Latex Moonlight Beige
 
  • COLOREXPRESS